The following steps will show you How to Seal Grain Bin with SANI-TRED external waterproof sealant.
Products Needed: PermaFlex, LRB (Liquid Rubber Base) and TAV (Thickening Activator)
The first thing you would do is prepare the substrate. Remove any loose deteriorated substrate, make sure the substrate is clean, dry, free of any previous applied products, and foreign matter.
If the grain bin has a previous applied product on the exterior that likely cannot be removed, one can either apply Sani-Tred products on the interior of the bin or over the existing material with the LRB/TAV at greater thickness (bridging beyond the existing material).
The photo below shows the galvanized steel & concrete being sand blasted in order to remove a previous applied products.
Prime approx 3″-6″ out onto the slab and approx 3″-6″ up onto the bin using 1 coat of PermaFlex (240 sq ft per gal).
(3.14 x diameter of grain bin) / 240 = gallons of PermaFlex needed.
Apply a 1-1/4″ diameter caulk bead of LRB/TAV mixture (Liquid Rubber Base, Thickening Activator) where the bin meets the slab. 2-parts LRB is mixed with 1-part TAV to create the thickest mixture possible (approx the same viscosity as silicone caulk).
3.14xdiameter of grain bin = circumference
LRB/TAV “Round Caulk Bead Chart“
Topcoat using 1 coat of PermaFlex (240 sq ft per gal).
(3.14 x diameter of grain bin) / 240 = gallons of PermaFlex needed.
Explore more of SANI-TRED’s informative blogs that cover a wide range of topics, from basement waterproofing and pool repair to concrete sealing grain bins and more. Our blogs are designed to provide valuable insights, expert tips, and step-by-step guides to help you navigate various aspects of home improvement and repair.
Need a solution tailored to your specific needs? Contact SANI-TRED today for a Free Quote.
Sanitred Waterproofing Products 1221 Stewart Rd. Lima, Ohio 45801
Questions? Call Our Experts 1-866-784-3308